Description
Product Description
The CR 44777 spacer is a metal component that fits between the frame and the Crown PTH50 pallet jack handle. It is designed to provide stability and alignment for the handle assembly, as well as to prevent excessive wear and tear on the frame. The spacer has a cylindrical shape with a hole in the center, measuring 1.5 inches in diameter and 0.25 inches in thickness. The spacer is made of durable steel and has a zinc-plated finish to resist corrosion. The CR 44777 spacer is compatible with all models of the Crown PTH50 pallet jack, and it can be easily installed or replaced by following the instructions in the user manual.
|
Cross References |
Crown 44777, CR44777, 44777 |
Product Specifications
|
Part Type |
Aftermarket Spacer |
|
Make |
|
|
Model |
|
|
Manufacturer Part Number |
CR 44777 |
|
Section |
Frame |
|
Condition |
New |
Features and Benefits
- Extends the life of your pallet jack by preventing damage to the wheel axle
- Improves the mobility and stability of your pallet jack by reducing friction and vibration
- Easy to install and replace with minimal tools required
- Compatible with the Crown PTH50 (NEWER), one of the most popular and reliable pallet jacks in the market
Recommended Use/Applications
The CR 44777 Spacer is specifically designed with Crown PTH50 (NEWER) pallet jacks. Ensure compatibility and seamlessly integrate this spacer into your equipment for enhanced performance.
Availability
- In stock and ready to ship
Warranty Information
It comes with a 1 year of limited warranty.
Not Sure Will This Part Fits Your Equipment?
If you are unsure whether the CR 44777 spacer is compatible with your pallet jack model, we are here to help. You can contact us through any of the following channels:
- Phone: 832-239-5393
- Email: info@palletjackson.com
- Live chat: Click on the chat icon on the bottom right corner of our website
Frequently Asked Questions
Q: How do I install the CR 44777 spacer?
A: To install the new spacer, you must reverse the steps for removing the old spacer. First, slide in the new spacer into the fork bracket. Then, insert the forkpin through the fork bracket and the new spacer. Next, tighten and secure the nut that holds the forkpin in place. Finally, test the fork assembly for proper function and alignment.
Q: How often should I replace the CR 44777 spacer?
A: The CR 44777 spacer should be replaced whenever you notice signs of wear or damage, such as cracks, chips, or rust. You should also inspect the spacer regularly as part of your pallet jack maintenance routine.
Q: How many CR 44777 spacers do I need for my pallet jack?
A: You need two spacers for each load wheel on your pallet jack. One spacer goes on each side of the wheel.
Q: Can I use the CR 44777 spacer with other pallet jack models or brands?
A: The CR 44777 spacer is designed for the Crown PTH50 (NEWER) pallet jack and may not fit or work properly with other models or brands. If you want spacers for other pallet jacks, please browse our website or contact us for assistance.
Q: How often should I check and replace the CR 44777 spacer?
A: You should check and replace the spacer as part of your regular maintenance routine for your pallet jack. We recommend checking and replacing the spacer every six months or after every 500 hours of use, whichever comes first.
Frequently Bought Together
If you are looking for other parts for your pallet jack, you may also be interested in these products:
- CR060017104 Front Bumper Screw For Crown Wave Work Assist Vehicle Electric Pallet Jack
- CR060021005 Nut For Crown M Stacker Electric Pallet Jack
- CR090132 Fuse For Crown Gpw Walkie Electric Pallet Jack 10 Amp
Explore our tools and hardware catalog designed to provide impeccable pallet jack frame replacements. You can rely on Pallet Jackson as your steadfast partner for all pallet jack replacement requirements.